Showing posts with label West Midlands Trains. Show all posts
Showing posts with label West Midlands Trains. Show all posts

Sunday, 15 June 2025

Midlands Rail Hub

A version of this article was published in Rail Magazine issue 1016

Since November 2022 Volkerfitzpatrick has been working on behalf of the West Midlands Rail Executive and the West Midlands Combined Authority to deliver three new stations on the Camp Hill Line in Birmingham to replace ones which had closed in 1941. Thankfully the line remained open, however for the last 80 years it has only been used for freight traffic, empty stock moves and some Cross Country services in order to bypass the Cross City Line.

The £61m scheme to reopen the Camp Hill Line will see three stations rebuilt with accessible, two platform stations capable of handling six-car trains. The initial two trains per hour service will operate between Birmingham New Street and Kings Norton, with trains joining the Camp Hill Line at St Andrews Junction. As the line will remain unelectrified the service will be operated by West Midlands Railway using Class 196 DMUs.

Heading south from New Street the first of the rebuilt stations on the route will be Moseley Village, which is located on St Mary’s Row in Moseley, just to the north of the short tunnel which takes the line underneath what will eventually be the entrance to the station and St Mary’s Row.

Moseley Village station progress April 2024

The next station will be approximately 1km to the south, located close to the A435 High Street in Kings Heath, next to a small retail park. The new Kings Heath station will be situated alongside the car park for the retail park and will have access from a new pedestrian overbridge onto High Street.

CG render of Kings Heath station (West Midlands Combined Authority) 

The final station to be rebuilt will be Pineapple Road, located approximately 1.5km to the south of Kings Heath, just north of the bridge which takes Cartland Road over the line in Stirchley. From there, trains will head south to Kings Norton, where the trains will terminate, before reversing to head back to New Street station.

Rebuilding stations which existed previously would normally be relatively straightforward, however, the re-opening of the three stations has not been without its challenges as after eight decades almost nothing remained of the former stations. The sites for the three stations are also especially constrained and substantial remediation works had to be carried out in order to stabilise cuttings and provide space for the longer platforms. Piling work is clearly visible at Kings Heath and Pineapple Road stations, whilst ground anchors and concrete has been used to stabilise embankments on either side of Moseley Village station.

Image from 2024 shows the extent of the piling work required at Kings Norton to stabilise an embankment 

Lack of space is not the only challenge faced by the contractor. In June last year, it was reported that the discovery of badgers in Moseley was to blame for a significant delay in the reopening of the station. Badgers are classified as an endangered species, which means their sets cannot simply be removed. This meant that Volkerfitzpatrick had to work with ecologists to rehome the badgers to a suitable location before work on the station could continue.

Operating services to Birmingham New Street is currently the only practical way to get trains into the city centre, although capacity at the station has been constrained for a number of years. However, the new service will be able to make use of paths into New Street which have become available following the Pandemic. In particular, Cross City Line services have not returned to pre-pandemic levels and currently, four trains per hour operate in each direction, as opposed to six trains per hour before the pandemic. This also means that there will be capacity to turnback the new Camp Line trains at Kings Norton on the Cross City Line without any expensive infrastructure modifications.

Ultimately, following the completion of the Midlands Rail Hub project, it is proposed to restore six trains per hour on the Cross City line into New St and to re-route the Camp Hill Line services into Birmingham Moor Street station.

The Midlands Rail Hub scheme is being developed jointly by the Department for Transport, sub-national transport body Midlands Connect, West Midlands Rail Executive and Network Rail. The project involves the construction of a two new chords in the Bordesley area from the Chiltern Mainline onto to connect the Camp Hill Line and line from Water Orton with the existing Chiltern Main Line into Birmingham Moor St. The project also involves building additional platforms at Moor Street and a new platform at both Snow Hill and Kings Norton, as well as increasing the number of tracks between Moor Street and Bordesley.

Two new chords will be constructed in Bordesley linking the Camp Hill to the Chiltern Main Line

The western Bordesely chord would not only allow Camp Hill Line services to terminate at Moor Street, but together with other proposed infrastructure interventions south of Kings Norton would allow additional services from Moor Street to serve Bristol, Cardiff, Worcester and Hereford. Similarly, in conjunction with other infrastructure works east of Birmingham, the second chord at Bordesley will allow additional trains to head from Moor Street towards the East Midlands. In total more than 50 stations will benefit from the Midlands Rail Hub plans.

Constructing the two new chords is likely to be one of the most challenging aspects of the scheme and will likely involve the rebuilding of the bridge over Bordesley Middleway, and the construction of a bridge over the roundabout at the western end of Small Heath Highway. In addition, both the eastern and western chords would also have to cross the Grand Union Canal. Ideally, both chords would be constructed at the same time, which should provide overall cost savings, by delivering the works within a single package.

The budget for the combined Midlands Rail Hub interventions is estimated to be £1.75bn and it is hoped to complete the project around the early 2030s, should funding be agreed. At the beginning of March, the Government announced funding of £123m to progress the Full Business Case stage and begin design work.

Due to the scale of the project, the Government as well as agreeing to fund the scheme must also grant a Transport and Works Act Order (TWAO), which would provide Network Rail with permission to begin construction. The TWAO will only be granted once the full business case has been appraised and funding granted which is likely to still be a few years away.

The reopening of the Camp Hill Line will provide benefits for residents who live in the south of the city who currently don’t have access to rail services. The Camp Hill Line could also improve local and regional connectivity with HS2 services from Curzon Street should the western chord be constructed. The western concourse of Curzon Street will be adjacent to the entrance to Moor Street station, however, the current plans for the new HS2 station do not include full integration with Moor Street, it is therefore hoped that plans will eventually be progressed to fully integrate the two stations.

The main entrance of the new HS2 station in Birmingham will be adjacent to Moor St station

If the full Midlands Rail Hub scheme can be realised then connectivity with HS2 services will be further enhanced and could bring passengers from Bromsgrove and Worcester within easy reach of HS2 services.

From the very beginning, the location of the new HS2 station has come under criticism, due to the distance from New Street station. But if the Midlands Rail Hub is realised then Birmingham Moor St could become a much more convenient station for onward travel from Curzon Street to destinations across Birmingham and further afield to the West and East Midlands, should both of the chords at Bordesley be constructed.

The Government has claimed that the Midlands Rail Hub has been made possible by “reallocated HS2 funding” freed up by the cancellation of the northern sections of HS2. However, in addition to the improved regional and cross-regional connections it delivers, Midlands Rail Hub has always been seen as key to unlocking the full benefits of HS2 and in fact, the cancellation of the northern section appears to have reduced the overall benefits and limits the scope for further connectivity improvements.

Without significant upgrades to the WCML, or the construction of a new line between Handsacre and Crewe/Manchester it will be unlikely that services will be able to operate from Curzon Street to Manchester, the North West and Scotland. And whilst this shouldn't affect the business case for the Midlands Rail Hub, it will limit the usefulness of Curzon Street Station and ultimately curtail the transformational connectivity HS2 Phase 2b would have provided between Britain's two largest regional cities.

That’s not to say the Midlands Rail Hub will not be transformational on its own, if delivered in full, but the benefits could be spread much further if HS2 was to be constructed in full.





Wednesday, 20 June 2018

RailLive special - A busy year for Vivarail (part 1)

Wales and Borders

I have made no secret of my support for Vivarail and the D-train project and have followed its development closely since 2015 when I made the first brief reference to a Vivarail display at Railtex 2015. Since then I have had the pleasure of riding on the first test unit 230 001 at RailLive last year and have written extensively about the development.

So it was with some excitement that I read that Vivarail had been chosen by KeolisAmey to supply 5 class 230s for the Wales and Borders franchise. In particular they will operate on the line which serves the town in which I live. I can't claim to have played any part in this, however I have supported and lobbied for the introduction of the class 230 on the Wrexham to Bidston line for a number of years.

image courtesy of Vivarail



Some background:

I and others had thought that the Wrexham to Bidston line would be a perfect line on which to deploy class 230s units. The service is in desperate need of improvement; the line is somewhat isolated and there are no servicing facilities close by. This is where the class 230's unique design comes into its own.

The units will be upcycled from now redundant D78 stock from the London Underground, this means that they will be less expensive to introduce than new trains and will perhaps, be cheaper to operate than the class 150s that currently operate on the line. This is important as current passenger numbers on the Wrexham to Bidston line are comparatively low. This fact combined with the zero growth basis on which the outgoing Arriva Trains Wales franchise was based, has meant that there was no incentive to invest in improving the service beyond trying to improve reliability.

What is really needed on the Wrexham to Bidston line is a half hourly service which would provide good connectivity with services to Liverpool, Chester, North Wales, Manchester and further afield. This connectivity can only be achieved with the introduction of a reliable half hourly service connecting at Bidston for Merseyrail services to Liverpool and at Shotton for services to Chester, Manchester and North Wales.

A new half-hourly service will require an increase from 2 units which currently serve on the line, to 4 with 1 unit available at short notice on standby should one fail. This increase will require additional investment by Transport for Wales, so the lower cost of the class 230 will help improve the business case.

Another fact which favors the class 230 is the modular design of the power packs. Each engine sits within a raft which is slung underneath the carriage, this means each powerpack can be removed and replaced relatively easily without the need for specialist equipment or train lift. This should mean that the units would not need to travel to Cardiff for repairs and that they can be stabled locally.

The 60mph top speed of the units should provide no issue in the case of the Wrexham to Bidston line as the frequent stops and low track speed means that trains rarely if at all ever reach 60mph. However the class 230 could potentially outperform the current class 150s. This is due to the increased power (whilst complying with strict environmental regulations), the lightweight aluminium body shells and the fact that the units have a greater number powered axles, 2 per powered car for a class 150, versus 4 per driving car for the class 230.

Unit service and design:

The first of 5 class 230s to enter service should do so in the summer of 2019 and will be used on the Wrexham to Bidston, Conwy Valley and Chester to Crewe services. This will allow class 150s to be taken south to enable the withdrawal of Pacers. Once new CAF built trains begin to arrive entire fleet of class 230s will be released in time for the introduction of a half hourly service on the Wrexham Bidston line in December 2021.

The design for the 3-car trains which will feature universal access toilet, WiFi, air conditioning, USB ports and 3-pin sockets is well underway and it is expected that the units will move to Wales for final testing and commissioning in early 2019. The class 230s will be fitted with a range of seating layouts and there will be plenty of space for bikes and luggage.

CGI image of the proposed layout for the new W&B units
image courtesy of Vivarail


Marston Vale line

At the start of the year I reported on the announcement that Vivarail was chosen to supply 3 class 230s for West Midlands Trains to operate on the Marston Vale line. Work to build the trains is well underway and they are expected to enter sercice in December this year (2018)


Image captured in May 2018 shows of one of the units featuring MWT livery ready to be fitted out 
image courtesy of Vivarail

The units will enter service between Bedford and Bletchley and be the first trains to be introduced within the new West Midlands Trains franchise.

The first 2 confirmed orders are exciting news, but that is not all that has been happening at Vivarail this year. In part 2 I will be taking a closer look at the battery unit that has been in development for the last year, which I had the chance to ride on this morning at RailLive.


Thursday, 1 March 2018

D Trains for Marston Vale Line

Vivarail has today (01 March 2018) announced that it has entered into an agreement with West Midlands Trains to build three new class 230 D-Trains for use on the Marston Vale line between Bedford and Bletchley. The D Trains which will enter service in 2018 will be the first trains to be introduced within the new West Midlands Trains franchise.

Vivarail’s CEO, Adrian Shooter, said “This is a big day for Vivarail. We have invested considerable time and money to bring our innovative D-Train to this point and we are delighted to be working with West Midlands Trains to introduce them into passenger service. As a West Midlands based company it will be extremely gratifying to see our trains running on local lines and we look forward to passenger feedback."

West Midlands Trains’ customer service director, Andrew Conroy, said “We are investing in almost £700 million of new trains for our passengers. The class 230s will be the first of over 400 extra carriages we are adding to our network. These trains are ideal for Bedford to Bletchley route. I am sure our passengers will welcome the new look and feel of the carriages and the extra space. When the new trains come on stream in December we will also be adding extra early morning and late-night services on the Marston Vale line Monday to Saturday.

230 001 at Long Marston back in summer 2017

This welcome news comes less than 2 weeks after Vivarail announced that a battery-powered version of the D Train number 230 002 has entered the production phase. It is hoped that the unit which will have a range of 50 miles after just a 10-minute charge will be ready to go out on the network fully approved for passenger service by the summer (2018)

It is assumed however that the 3 units for the Marston Vale line will be powered by convention diesel-electric traction. Diesel-electric units are fitted with 4 Ford Duratorq engines producing 200hp each, giving a total power output of 800bhp per set which will come in either 2 or 3 car formations.

No specific details were given about the interiors but Each D Train is treated as an empty shell with train operating companies able to specify interiors which suits the particular needs of the route. A pre-production unit which was used for testing and demonstration had a variety of seating options fitted in order to show what is possible. Each train will be fitted with modern amenities such as USB charging points, wifi and will be fully PRM TSI compliant

 Interior layouts, regional on the left high capacity commuter on the right

The order for 3 trains may be relatively small but it proves that Vivarail is able to provide tailored solutions for routes which have specific requirements within a short space of time. There are many more rural lines across the country which require only a small number of units but are desperate for additional capacity and modern rolling stock.

I think we will be hearing more good news from Vivarail this year. 

Written by Chris Howe



Latest blog post

Midlands Rail Hub

A version of this article was published in Rail Magazine issue 1016 Since November 2022 Volkerfitzpatrick has been working on behalf of the...