Mersey Gateway, 3 years on

The Mersey Gateway opened in October 2017 providing improved links from the M56 and Runcorn across the Mersey to Widnes and on to Liverpool. The £600m project which took 3 years to complete, comprised of a new 6 lane cable-stayed bridge spanning the river Mersey and substantial upgrades to the A553 which runs through Runcorn connecting the M56 to the new bridge.

The new crossing received a mixed reaction from locals and motorists when it first opened, as for the first since the Silver Jubilee Bridge opened, motorists would have to pay to cross the Mersey from Runcorn to Widnes. There were also teething problems with the barrier-less toll system. People complained that signage warning people that they must pay online to use the bridge was poor, this in part lead to almost £20m worth of fines being issued within the first 20 months of operation. 

Mersey Gateway bridge viewed from Wigg Island in Runcorn

Other problems occurred with people using rental vehicles, who thought they were paying for their crossing, but had in fact paid for crossings made by another person who had previous used the same vehicle.

Many people simply just forgot about the toll and missed the 11:59pm day after deadline, which if you miss generates a £20 fine + £2 toll charge in each direction. This fine increases steeply if you do not pay within 14 days.

Residents who live in Halton can apply for a residents pass, at a cost of £10 per year, which allows for unlimited crossings at no extra charge. And regular users can also create an account online which can be topped up and provides users with as much as a 10% discount for each crossing, depending on if they choose to use the sticker option or not. In December 2019 Emovis Operations which operates the toll system released an app which has made it easier for users to keep track of and pay for crossings.

View of the bridge from below the viaduct carrying traffic from the A533 to the bridge

Despite the teething troubles and an ongoing campaign to remove the toll, the bridge had up until the outbreak of Covid19, been a success, carrying 67,000 vehicles each day between October and November 2019. It had also reduced congestion, particularly on A557 Weston Point Expressway, which regularly saw queues of 10 minutes or more.

Mersey Gateway in numbers

• Bridge length 2.1km
• Tallest supporting pylon 125m
• 146 stay cables
• Longest single span 318m
• Carrying as many as 67,000 vehicles a day (pre-Covid)
• Cost £600m

Even if you do not consider the number of vehicles using the bridge to be a measure of success, the new bridge is a local landmark comparable to the existing and iconic Silver Jubilee Bridge. Its 3 tall concrete pylons support a relatively slender deck via 146 stay cables, and yet, whilst the tallest of the 3 concrete pylons reaches 125m high, the bridge itself manages to compliment rather than overshadow the existing road and rail bridges.

Speaking of the existing bridge, it had reached its design capacity some decades ago and was in need of urgent repairs, this despite recent extensive works to repair the road and deck and repaint the distinctive steel arch structure. The fact is, the bridge simply wasn't designed to carry the volume of traffic which crossed the bridge each day. The original plan was to close the bridge for up to a year once the new crossing had opened to carry out repairs and convert 1 lane in each direction to cycling and pedestrian provision. 

 

The iconic Silver Jubilee Bridge has been part of Runcorn's skyline for over 50 years

In the end, the Silver Jubilee bridge didn't fully reopen until February 2021. This was, in part due to changes to the proposals made by Halton Borough council. They wanted the bridge to integrate better with the town centre in order to tie in with the redevelopment plans they have. Under the original plans, the bridge would have been accessible by cyclists and pedestrians, but would have been less well connected to the town centre. Road access would have been maintained to the A557 via the existing junction arrangement. Instead, the grade separated junction that connected the A557 to the bridge has been replaced by a single at-grade roundabout. 

 

The new roundabout connecting the A557 to the SJ Bridge

The Silver Jubilee Bridge is once again open to vehicle traffic and is now tolled, costing £2 to cross. This arrangement wasn't without its critics, but it does seem to be the only logical approach. Keeping the existing bridge free to motorists would of course encourage people to use the bridge instead of the new crossing, despite the journey time over the existing bridge being much longer, which would have been compounded by increased congestion as people attempted to avoid the tolls. 

Video trip across the Mersey Gateway bridge from Widnes along the A533 through Runcorn to the M56.

Speaking as someone who infrequently uses the bridge, it would have been nice if the bridge were free to cross, as it is now nigh on impossible to get from West Cheshire or the Wirral to Liverpool without paying a toll. If you really wanted to avoid paying the toll to use the Mersey Gateway bridge, the only option would be a 10-mile detour via the congested roads of Warrington town centre. To avoid paying £1.80 to use either of the Mersey tunnels would entail a detour of 30 miles.

Having said that, I do appreciate that the £600m project had to be funded somehow, and the government seemed unwilling at the time to fund the construction of a new crossing. This despite tolls being removed from the Severn crossings in 2018 and around the same time the Scottish Government funding a new £1bn bridge across the Firth of Forth, which is also toll-free.

But in the end, a new and in my opinion attractive bridge has been constructed which people in the region will continue to feel the benefits of for years to come.

Want to know more? You can find out about how the bridge was constructed in the series of blogs I wrote as I was following the project. Click here to find out more.

 

Twitter - Facebook - Youtube

Parc Adfer - Turning trash into energy

Parc Adfer is the name given to a £800m waste to energy facility located on the Deeside Industrial Park in Flintshire, North Wales. The plant which became fully operational in December 2019 can process up to 200,000 tonnes of non-recyclable waste per year and generate up to 17MW of electricity which is fed to the national grid, enough electricity to power up to 30,000 homes.

The facility was built through a public-private partnership (PPP), with Wheelabrator Technologies chosen to deliver and manage the project, Wheelabrator which operates other waste-to-energy facilities in the UK and US will operate the plant for 25 years. The company processes over 8 million tonnes of waste per year across its 25 sites, generating 732 MW of electricity, enough to power 671,000 homes.

 

The building itself seems relatively modest for a plant capable of proccessing 200,000 tonnes of waste a year

Five Welsh authorities worked in collaboration with assistance from the Welsh Government to develop the proposal, which is known as the North Wales Residual Waste Treatment Project (NWRWTP). The 5 local authorities are Flintshire, Isle of Anglesey, Gwynedd, Conwy, and Denbighshire. It is from these 5 local areas where the majority of waste is collected.

Local waste from Flintshire is generally brought in directly by refuse vehicles, whilst waste from further afield is brought in by articulated vehicles with high volume capacity trailers. Waste transfer sites receive waste from refuse vehicles, which is then transferred to the trailers which can each carry up to 27 tonnes. In this way, local authorities can reduce the number of vehicles that are needed to deliver waste to the facility.  

The construction of the plant generated some local opposition, with people raising concerns about air pollution, however, Wheelabrator say “Our facilities use the most advanced environmental control systems to meet and exceed some of the most stringent environmental standards in the world” adding “Waste-to-energy facilities are required to comply with strict air quality limits established by the European Waste Incineration Directive”. [1]  

Indeed, modern waster-to-energy facilities are nothing like the incinerators of old. High burning temperatures up to 1110°C and filtration systems can burn off and then filter out much of the particulate matter. The facilities themselves can reduce the volume of the original waste material by 95-96%. Whilst Metals which remain within the waste can be removed and sent on to be recycled, the remaining ash can also be recycled and is used within the construction industry as secondary aggregate. 

Further to this, Wheelebrator refer to a study that was undertaken on behalf of the German Federal Environmental Agency [2]. The report demonstrates that waste-to-energy facilities can have a positive net impact on greenhouse gas emissions through the reduction of methane emissions, which would normally be generated by waste which has been sent to landfill. Whilst methane only accounts for 10% of greenhouse gases globally it can trap 84 times more heat per mass unit than carbon dioxide

View from Weighbridge Rd

Of course, there remain pros and cons, as such facilities do still emit Co2 into the atmosphere and very small amounts of other particulates, even if the amounts are so small, as not to pose a risk to the environment or people living close by. In general though, energy recovery from waste can play a crucial role in managing the waste that we the public produce. 

Flintshire Country Council recycles 58,000 tonnes of waste per year, but this still only accounts for about 69% of the total amount of waste that is recycled. This is significantly above the national average for Wales, which stands at 60% of waste recycled. However, this still leaves a huge volume of waste that either can't be recycled or isn't yet being recycled by the public 

So, whilst as much as 40% of the waste generated by households in Wales and across the UK remains un-recycled or un-recyclable, we must find solutions to disposing of the waste which we produce, a solution which doesn't involve burying it in the ground for future generations to deal with.

 

[1] https://www.wtiparcadfer.co.uk/environment-and-benefits/environmental-performance/

[2] https://www.wtienergy.com/sites/default/files/German%20BDE_klima_abfall_en.pdf

 

 

  Twitter - Facebook - Youtube

 

Reblog: D Train (Class 230), from passionate supporter to future passenger [2021 update]

First published in Rail magazine in 2019

In 2014 I become aware of an idea to fit diesel engines to redundant London Underground stock, an idea which if proposed by anyone else would have seemed, well a bit out-there. However this idea was proposed by Adrian Shooter, the highly respected ex chairman of Chiltern Railways, who decided to try to help solve the looming shortage of DMUs.

By November 2014 Vivarail chaired by Mr Shooter had begun purchasing ex LU D78 stock intended for conversion to DEMUs. In total 156 driving motor and 70 trailer vehicles were purchased and taken to Long Marston. Reaction from the industry was mixed and the mainstream media's response was harsh. I can remember it being said that "we don't want cast offs from the London" when it was suggested they could be used by Northern.

However, negative press reaction wasn't enough to deter Vivarail from pressing ahead with the project and by 2019 the fruits of their labour began to pay off. 3 class 230s entered passenger service on the Martson Vale line and 5 units were ordered by Transport for Wales Rail for use on the Wrexham-Bidston Line.

Around the time that I learned about the D-train project I became involved with the Wrexham-Bidston Rail Users' Association (WBRUA). The Association had been battling for improvements on the line for 3 decades with little success; but not through lack of trying. Throughout the 90s it seemed as if the line was being wound down and if it wasn't for the freight services that used the line it could of closed all together. 

In 2016/17 the WBRUA begin to actively support the introduction of class 230 on the line, with the proviso that the units were used in order to facilitate the introduction of a half hourly service. This would require 5 units and was at the time a big ask, however the WBRUA believed that a reliable half hourly service would unlock the potential of the line. 

The WBRUA was, and remains confident that 230s which have been delivered to TfW will outperform class 150s and provide a superior customer experience. In terms of performance, 4 diesel engines will provide 600kw of power to 4 rafts of batteries and with double the number of powered axles, will ensure the class 230s will be able to out-perform the class 150s. 

The WBRUA estimated that despite having 3 cars instead of 2, the class 230s with their all aluminium bodies will have a 30% better power to weight ratio than a 2 car class 150. 

 Class 230 vs Class 150 side by side comparison

 

 Now in 2021,

The class 230s were supposed to enter service on the line in early 2020, with 2 units intended for use on the Wrexham-Bidston line to maintain the hourly service, the other units were to be put to work on the Conwy Valley line, it was also suggested 1 unit could be used on the Chester-Crewe shuttle. However, it was soon established that a class 230 with a top speed of 60mph, despite its superior acceleration (when compared to class 150) would not be able to maintain the current Chester to Crewe journey time. It was intended that by December 2021 all 5 units would transfer to the Wrexham-Bidston line so that the half hourly services could commence.

In the end the first class 230 did not arrive in Wales until July 2020 owing to problems with the supply of crucial components and the added features stipulated by TfW such as wide gangways, for which parts had to be specially fabricated.

 

 230 006 at Wrexham General, having arrived from Long Martston that day.

230 006 was the first unit to arrive, it was driven from Long Marston to Wrexham General under its own power, with a Vivarail crew onboard. Soon after its arrival, 006 began testing on the line and completed between 2 and 3 runs each day from Wrexham General to Birkenhead North EMU Depot. Transport for Wales Rail had struck a deal with Merseytravel to use 1 of the roads at Birkenhead North EMUD to stable class 230s overnight. In August 2020 006 was joined by 007 and that same month 002, 006, 007 and 008 were authorised for passenger use by the ORR. 008 and 009 have now also arrived with 010 expected in the coming months.

There is currently no secure stabling provision for the class 230s at Wrexham, so all class 230s are being stabled at the Merseyrail EMUD overnight. Refuelling currently takes place at Chester TMD, which is used to maintain TfW's fleet of class 175s. On a handful of occasions 6 car class 230s have been seen making the journey from Birkenhead to Chester for refuelling. 

  230 008 approaching Neston station during testing

TfW have now taken ownership of a number of units and it appears as if they are gearing up to begin driver training. TfW staff members have been seen aboard class 230s making runs on the Wrexham-Bidston line and a class 153 has also been making a number of runs each day from Chester to Birkenhead North via Wrexham for route familiarise.  

A sufficient number of crews must be trained to operate the class 230s by December 2021 in order for the half hourly service to commence. Despite the outbreak of Covid19 and subsequent reduction to the services on the Wrexham-Bidston line, there has been no hint that the half hourly will be shelved. The half hourly service to be introduced from December 2021 was contractual agreement agreed by Transport for Wales and its private partner KeolisAmey when it took over operation of Wales and Borders services from Arriva Trains Wales in 2018. The Welsh Government through TfW has now taken over day to day running of the railway from KeolisAmey. However KeolisAmey still has a role to play in delivering the upgrade of the Valley Lines.  

There is no date yet for when the class 230s will enter service, however with the crews finally beginning familiarisation and training it is hoped that the first units could enter service by May this year (2021).

 

 

Railway maps on Redbubble

A series of railway network maps are now available on Redbubble. The stylised maps have been designed to fit perfectly on mugs, but also work well on a variety of other media such as t-shirts and prints.

The collection so far includes the Merseyrail network, West Coast Main Line and Great Wester Railway, but I will be adding to the collection over the coming weeks and months. If you'd like to suggest a network map then let me know in the comments below.

Don't see anything that takes your fancy? Let me know in the comments or e-mail Info@EngineeringFocus.co.uk and I'll consider making one of your choosing. New designs will be added, so keep checking back to see if there's the one you want.

Railway maps on Redbble

CrossCountry

Great Western Railway

West Coast Mainline

 

Merseyrail Network

CP5 HLOS: "Not all doom and gloom"

This is article was originally published in Rail Magazine in 2019.

In 2012 the Department for Transport published its high-level output specification (HLOS) for control period 5 (CP5), covering the period from April 2014 to March 2019. The 5 year, £38bn plan promised to deliver 1,360 route km of electrification by 2019, and to transform rail travel across the length and breadth of the country. 4 months prior to the start of CP5 Rail magazine published a map created by Engineering Focus, which highlighted many of the schemes which were promised to be completed by 2019. Now that CP5 has come to an end and CP6 has begun, it is a good time to see what has been achieved, which schemes were postponed, which were cancelled and which schemes are behind schedule.

As work got underway at the start of 2014 passengers were reassured that any disruption between 2014 and 2019 would pay off, as new services, new trains and quicker journeys would be delivered once the work had been completed. Unfortunately only 1 year into CP5 it was clear that electrification of the GWML between London Paddington, Bristol, Cardiff and Swansea was not going to plan. By the summer of 2015 the original budget of £800m had more than tripled to £2.8bn, therefore in a bid to keep costs under control and to keep electrification of the GWML on track, the government announced that a number of electrification schemes would be "paused".

Initially, it was announced that Midland Main Line (MML) and Transpennine electrification would be paused, whilst electrification of a number of GWML routes would be deferred. The routes deferred included Didcot Parkway to Oxford, Bristol Parkway to Bristol Temple Meads, and lines to Henley and Windsor. The electric spine which promised to provide an electrified route for freight services from Southampton to the Midlands and across to the MML was also paused.

The pause was intended to allow the DfT and Network Rail to assess which schemes should receive priority and it was thought that some schemes would simply be pushed into CP6. However in 2017 the government made the announcement that the line between Cardiff and Swansea would not be electrified at all, and worst still electrification of the Valleys lines would also be cancelled altogether. Electrification of the Midland Main Line north of Kettering and Corby was also cancelled, as was the electrification of the line between the WCML and Windermere.

Funding for the electrification of the East-West route between Oxford and Bedford was withdrawn and electrification between Reading and Oxford was deferred. It is now unclear if any part of the proposed electric spine will be delivered. Conversion of the line between Basingstoke and Southampton from 3rd rail to overhead is also now off the table, so any hopes that freight operators had of an electrified link between Southampton and the North have been dashed.

It is now hoped that electrification between Bristol Parkway and Cardiff will be completed by January 2020, over a year behind schedule. Whilst passengers have benefited from the introduction of new class 800 bi-mode units which began to enter service in late 2017, those travelling from South Wales have yet to feel the full benefits of electrification, such as the promised reduction of the Cardiff to London journey time of 15 minutes. 

The original article was accompanied by a map which showed which projects were completed, delayed or cancelled. Correct as of spring/summer 2019. A full-size PDF can also be viewed here

The North West electrification programme (NWEP) also suffered a number of setbacks. Whilst Transpennine Express did begin to operate electric services between Manchester Airport and Scotland via Chat Moss/WCML from December 2013, electric services between Liverpool Lime St and Manchester Airport did not begin until March 2015, 3 months behind schedule. The 3 month delay although relatively modest, was a sign of further delays to come. As the NWEP progressed the timescale for the opening of subsequent phases began to slip. Poor ground conditions, known and unknown mine workings were blamed for the delays, which in August 2015 led to Balfour Beatty pulling out of the project after completing only 2 out of 7 phases. The route from Manchester to Preston via Bolton was originally scheduled to be complete by December 2016, however delays meant that class 319s did not begin to operate on the line until February 2019.

 

 319 362 stands at Liverpool Lime St before setting off for one of the first electric services between Liverpool and Manchester in March 2015.

A report by the Nation Audit Office published in November 2016 found that there were major failings by Network Rail which lead to the cost of electrification of the GWML between Maidenhead and Cardiff to rise to £2.8 billion. The NAO stated that Network Rail “was too optimistic about the productivity of new technology”, and that “It [NR] underestimated how many bridges it would need to rebuild or modify”. The report also highlighted the fact that NR failed to manage the challenges of using new electrification equipment, which had not been tried or tested previously anywhere in the world.

The NAO report acknowledged that electrification of the GWML was complex and the fact that the railway passed through heritage areas and areas of outstanding natural beauty, which provided additional challenges. The report also attributed some of the blame to the DfT, which it said: “did not produce a business case bringing together all the elements of what became the Great Western Route Modernisation industry programme until March 2015”. This was more than 2 years after placing the order for new trains and over a year after Network Rail began work to electrify the route.

So far, of the electrification schemes paused or deferred, announcements have only been made regarding Transpennine and MML electrification. Transpennine electrification will now take place during CP6, although NR is yet to release any concrete plans. As for the MML, it will now only be electrified as far north as Market Harborough, in order to provide a connection of the newly electrified sections between Kettering and Corbyn to the National Grid.

It wasn't only electrification schemes that faced cutbacks and delays, with the full Northern Hub programme yet to be realised and uncertainly remains over when or if key elements will be delivered. A crucial element of the Northern Hub project was to unblock the bottleneck between Manchester Piccadilly and Oxford Rd, this was to be achieved with the construction 2 new through platforms at Piccadilly and widening of the viaduct between Oxford Rd and Piccadilly, in addition, Oxford Rd station was to be substantially remodelled. Yet to date no work has taken place and there are questions over whether or not the proposal will ever commence.

The £85m Ordsall Chord which formed part of the Northern Hub project was complete in 2017, allowing trains to travel between Manchester Victoria and Manchester Piccadilly for the first time, and a number of smaller schemes have been completed or are underway across the Pennines, which seek to improve reliability and reduce East-West journey times.

It's impossible to talk about CP5 without mentioning Crossrail, although not strictly part of the CP5 HLOS, it was expected that trains would begin operating from Heathrow and Reading through central London to Shenfield and Abbey Wood by the end of 2018. However, just months before services were expected to begin it was announced that the opening date would be pushed back to autumn 2019. Now it is thought the section through central London will not be fully completed until 2020 or possibly 2021. The budget for the project has risen by £3bn, with the cost rising from £14.8bn to £17.6bn. 

(The central section of Crossrail is now not expected to open until 2020)

 The newly constructed Crossrail station at Canary Wharf pictured in 2015

It's not all doom and gloom however, the North West electrification programme was largely completed during CP5, with the exception of the line between the WCML and Windermere. Despite the delays, services across the North West have been transformed and now finally new trains are beginning to enter service.

In Scotland the Edinburgh Glasgow Improvement Programme (EGIP) saw the electrification of 150 route kilometres of railway between Cumbernauld and Newbridge Junction which allowed new class 385 EMUs to enter service between the 2 cities. Electric services between Edinburgh Waverley and Glasgow Queen Street via Falkirk High commenced in 2017, initially operated by class 365s and class 380s up until summer 2018, when class 385s built by Hitachi at Newton Aycliffe were finally signed off for passenger use.

Although improved East-West connections across London are delayed for now, North-South connectivity has been transformed, thanks to the £7bn Thameslink programme which had been underway since 2009 and was complete towards the end of CP5, allowing trains to operate from Bedford and Cambridge through the capital to Brighton and Gatwick Airport.

I think to say that CP5 didn't go to plan is somewhat of an understatement, however, whilst the updated version of the map does highlight those schemes which have been delayed or cancelled, it should also serve to highlight some of the great achievements accomplished during the 5 years between 2014 and 2019. And many passengers are starting to see the benefits, now that a large number of new trains are finally beginning to enter service.

Twitter - Facebook - Youtube

Work begins on Chester's Northgate development

In 2016 it appeared as if the redevelopment of Chester's Northgate quarter was finally going to get underway, after years in the planning, false starts, and a number of major re-designs. The redevelopment of the area was originally supposed to begin in 2010, but the financial crisis saw funding withdrawn, which lead the company behind the plans to revise the proposal in order to reduce the scale and therefore the cost of the development.

However Cheshire West and Chester Council and the developer were unable to agree on a way forward, therefore the authority took the decision to develop it's own plans and to seek ways in which it could fund any future development itself. 

In 2015 work got underway to transform the old Odean Cinema into a cultural centre, which now includes a theatre,  cinema, restaurant and library. Then in 2016 work got underway to construct a new bus station on George Street, which, once complete would allow for the construction of the Northgate development on the site of the old bus station.

The image above is probably what most people imagine when picturing Chester, black and white mock Tudor rows, complete with Roman Centurion.

Cheshire West and Chester Council continued to develop and redraw plans over a number of years as shopping habits changed and high streets across the country continued to struggle. The original plans put forward included a large department store and were much large in scale. However, the final plans look much smaller in scale and will not include any new shops. The emphasis has instead been on providing a new indoor market space, new 6 screen cinema and a new multi-story car park. The new car park will not however lead to a net increase in city centre parking, as Trinity St and Market St car parks will eventually be closed and demolished in the future to make way for the next phase of the development.

The reduced scale of the development is highlighted by the expected cost for phase 1, which is estimated to be just £72m. Compared to the cost of the original 2010 redevelopment which had a budget of £460m. Unlike the original proposals which were drawn up by a private developer, the cost for the new proposal will be borne by the local authority. The development website states the development will be funded on a "traditional public sector ‘payback’ basis which will ensure that the capital expenditure is written down over a period of 25 years and is factored into the Council’s annual budget"

Part of the development site, with the modern extension to the Storyhouse pictured to the left in the background.

The original proposals which were much larger in scope would have encompassed the old bus station, market building, Forum shopping centre and Crowne Plaza hotel. Whereas the proposals for phase 1 only include the site of the old bus station. A decision is yet to be made on the future of the existing market building and Forum shopping centre, but CWaC says that plans will be drawn up in late 2020 and that work cannot begin on the existing market hall until the new one is complete.

The proposals for phase 1 may be modest in comparison to the original plans, but they still have the potential to transform the area, which for a long time has been neglected. This despite the site sitting within the heart of the city, close to Chester Cathedral and behind the striking Town hall which was built in the Gothic Revival style in 1869. The site is also next to the grade II listed building which now houses the Storyhouse, which is an art deco brick building, built in 1930s, albeit with a modern, but complementary extension. The terracotta façade which formed the entrance to the former library is also grade II listed.

The Grade II listed facade of the former library, which will act as the entrance to the new inclosed market

Thankfully the face of the former library will be retained and will in fact form a key part of the development. The main structure of the building will be largely removed, it had no architectural merit and was a relatively recent development. The faced itself however will serve as a striking entrance to the new indoor market and cinema leading people through into a new modern development. One which the authority hopes will sit well within its surroundings, unlike the concrete and brick building which currently sits at the rear of the town hall and houses the existing market.

The image above shows work taking place to clear the site, in the distance is the clock tower of the Town hall and to the far right, part of the building which houses the existing market.

Work on the Northgate development officially got underway in June 2020, when a modest socially distanced sod-cutting ceremony was held. The main contractor Vinci Construction has now taken possession of the site which is currently in the process of being cleared. The steel and glass bus shelters have already been removed so there was little in the way of demolition required. But that still left the not unsubstantial job of clearing the huge brick paved area which formed the old bus station. A small amount of careful deconstruction is also taking place to remove the building which housed the former library, whilst keeping the facade intact. 


As well as site clearance, work is also underway to redirect utilities and to construct a new drainage tunnel. In addition, archaeological work is also taking place, with several Roman artifacts already discovered.

 

The image above shows the remaining structure of the former library as of Augst 2020

Work is also taking place on the A5628 St Martin's way to remodel the junction, with Hunters St now closed to traffic. Eventually, a new junction will be constructed to replace the existing Sens Cl junction which will connect to the new Hunters St alignment, leading to Northgate St.

The dual carriageway has temporarily been reduced from 4 lanes to just 2, which is causing congestion, this despite the overall reduction in traffic volume brought about by Covid-19. With work expected to take until Summer 2021 to complete, and schools set to re-open in September it is possible that congestion could start to become more of an issue over the next few months. It's probably advisable to avoid that section of the A5628 all together if possible. 

Whilst the upheaval will undoubtedly be frustrating for motorists and local residents, it will only be temporary, it is hoped, transform a large part of the city centre, helping the city to attract more visitors and secure the future for the city's independent market traders.

There is a video on Youtube which shows the scale and the development and progress on site clearance as of August 2020. [see below]

 

Twitter - Facebook - Youtube

End of the line nearing for Merseyrail's 508s and 507s

On Sunday 16th of August, a pair of Merseyrail class 508s left Birkenhead North depot for the last time. The units were hauled by a class 57 operated by Rail Operations Group over the Wrexham-Bidston line, then on to Craven Arms, there they would remain overnight before being taken to Newport docks, where they are to be scrapped.

The scrapping of Merseyrail's fleet of class 508 and 507 units has been on the cards for some time, as they are to be replaced by new class 777 units built by Stadler. However, 110 and 134 have been retired much earlier than their classmates and months before the expected introduction of the first class 777.

It appears 110 and 134 had reached their mileage limit and were in need of an overhaul, therefore with new units on the way it wasn't deemed cost-effective to keep them in service. Space at Metseyrail's Birkenhead North and Kirkdale depots will also start to become limited as more class 777s arrive. 6 have arrived so far and are being stabled at the recently rebuilt Kirkdale depot. There is space for overnight stabling at some stations for 508/7s, but it is likely that depot space will still start to become constrained soon.

  

508 115 at Liverpool Lime Street

It is however unlikely that we will see more 508 or 507s being sent off-lease just yet, at least not until the first class 777s begin to enter service later this year. Before Covid-19, 52 class 508/7s were required to be in service each day. With 110 and 134 now sent for scrap, that leaves a total of 57 class 508s and 507s remaining in service. With the fleet approaching 40 years old it can be assumed that a number of the units will be out of service for maintenance or repair at any given time. 134 hadn't been used since January 2020, however 110 was in service as recently as Wednesday the 12th of August. 

 

507 003 at Chester Station

Merseyrail has ordered just 52 class 777s, with only 50 being required each day. This reduction in the requirement will be achieved through the speeding up of the timetable, which will reduce the number of diagrams. The new units should also be much more reliable and therefore fewer will be out of service each day for maintenance or repairs. Merseyrail does have the option to purchase a further 60 units, but this is on the basis that services are extended in future to places such as Helsby, Skelmersdale or Wrexham. With extension dependant on the success of a battery trial and or further electrification. One class 777 is to be fitted with batteries and tested on the Merseyrail network, this will be to test the feasibility of future extensions without the need for costly electrification. 

 507 001 alongside a Network Rail measurement train at Hooton Station

I posted a video to Youtube of the move on Sunday night and was surprised by the number of people who were saying that they will be sad to see the 508/7s go. I assumed that people would be glad to see the old making way for the new, but thinking about it, it is easy to see why people may think fondly of the old class 508s and 507s. They have served the Merseyrail network well for almost 40 years, with Merseyrail as an operator regularly sitting at or near the top of National Rail Passenger Survey. The refurbishment carried out between 2002 to 2004 also means that the units still look fairly modern to this day, both inside and out.

However, their days are numbered, so if you want to experience a Merseyrail class 508 or 507 you probably have about 18 months left in which to do so, before they're all sent off for scrap.


In 2019 I wrote about how Merseyrail are adapting station platforms to provide step-free access once the new 777s enter services, find out more: Paving the way for new trains

Twitter - Facebook - Youtube